|
Welcome |
|
Applications |
|
Bagged Systems
|
|
ELITE CRETE OF NEVADA |
|
Distributor & Installer of Decorative Concrete & Architectural Overlay Systems |
|
THIN-FINISH™ Pre-Mixed Overlay: (Just add water – The polymer is already in the bag) A high strength, cementitious topping material designed for resurfacing, overlaying, texturing and repairing concrete floors and surfaces. THIN-FINISH™ is a “just add water” overlay mix for creating Skim Coats, Broom Finishes, Splatter Textures & Knockdown Finishes, Slate Trowel Down Finishes, Bond Coats and Vertical Wall Finish Base Coats. Sold as White base but can be custom colored with Portion Control Colorants™ or SYPP™ Colorant to achieve over 36 colors. Can also be stained with CHEM-STONE™ Reactive Stain, ULTRA-STONE™ Antiquing Stain or HYDRA-STONE™ Dye Stain for additional highlighting effects.
|
|
TEXTURE-PAVE™ Pre-Mixed Overlay: (Just add water – The polymer is already in the bag) A high strength, cementitious topping material designed for resurfacing, overlaying, texturing and repairing concrete floors and surfaces. TEXTURE-PAVE™ is a “just add water” overlay mix for creating Thin Stamped Overlays, Concrete Counter Tops, Patching or Regrading. Sold as White base but can be custom colored with Portion Control Colorants™ or SYPP™ Colorant o achieve over 36 colors. Can also be stained with CHEMSTONE ™ Reactive Stain, ULTRA-STONE™ Antiquing Stain or HYDRA-STONE™ Dye Stain for additional highlighting effects.
|
|
MICRO-FINISH™ Pre-Mixed Overlay: (Just add water – The polymer is already in the bag) A high strength, cementitious material designed for creating an extremely smooth finish to the top of THIN-FINISH ™. MICRO-FINISH™ is a “just add water” overlay mix for creating smooth finishes on concrete surfaces, floors and walls. Sold as White base but can be custom colored with Portion Control Colorants™ or SYPP Colorant to achieve over 36 colors. Can also be stained with CHEM-STONE™ Reactive Stain or HYDRASTONE ™ Dye Stain for additional highlighting effects.
|
|
First and foremost, Elite Crete Systems are not typical acrylic modified cement systems. Yes, any of the applications that can be installed with typical acrylic systems can be installed with Elite Crete Systems, but our systems offer many additional applications that simply cannot be done with acrylic systems.
|
|
Before |
|
After |
|
|
|
· Skim coats, base coats or bond coats prior to the application of other finished applications. · Splatter textures and knockdown finishes perfect for residential & commercial pool decks, sidewalks and patios where an aesthetic decorative but non-slip finish is required. · Broom finish surface restoration where structurally sound concrete is in need of surface repair and rejuvenation back to the look and strength of freshly poured concrete · General surface repair under 3/16" thick as a better alternative to tearing out and replacing concrete. · Slate trowel down finishes where a decorative stone type finish is desired. Ideal for virtually any interior or exterior concrete surface. · Vertical decorative or restoration applications either sprayed on or troweled on to rejuvenate ugly concrete retaining walls, cement block walls and more.
|
|
· Primarily used for thin stamped overlay applications ranging from 1/4" to 3/8" thick where the realistic look of stone, brick, tile, even wood planking is desired. · The perfect alternative to conventional full depth stamped concrete but without the mess and hassle of complete tear out and repour. · Restoration where deep fill, patching and regrading are required. · Vertical decorative or restoration applications on concrete or cement block walls. · Cast in place or precast concrete counter tops.
|
|
|
|
|